Unique Tips About How To Check Tire Wear Penny

The only thing you need here is just a penny, and let’s get started with the following lincoln penny tire test.

How to check tire wear penny. Take a penny and place it between the tire tread blocks with lincoln’s head upside down and facing you. Try to park your vehicle somewhere flat and make sure the handbrake is on identify 2 or 3 spots. How to test a tire with a penny?

Use a tire pressure gauge to check the air pressure in each of your tires. You can check the tire tread with a penny by placing a penny upside down and seeing how much of the tire covers lincoln’s head. Penny tire test is an easy way to find out a tire’s tread.

The tire penny test takes advantage of the distance from the edge of the penny to the top of abraham lincoln’s head (2/32″), which is the minimum legal limit for tread depth for an. The gauge has a wide base to it, and a narrow probe that hangs below the base. Place your penny into a tread groove upside down.

Staying on top of your tires trea. Simply hold a penny upside down, making sure abraham lincoln’s head is facing the ground. This practice doesn’t require complex tools or expert knowledge;

One easy way to check for wear is by using the penny test. Your tires are good to go for more mileage. The service department at randall reed's planet ford 45 in spring, tx shows you how to check your tires for tire tread wear, using a tire tread depth gauge a.

Observe the exposed portion of the penny. I generally do it from the right top side. All you have to do is grab an abraham lincoln penny and follow 3 easy steps.

Grab a penny, and you have everything you need! With the head of the coin facing you, insert the penny into the tire rib upside down, with lincoln’s head pointing downwards. If multiple treads measure above the.

Place the penny into your tire’s tread depth with ‘ol honest abe facing toward you. If you can see the top of lincoln’s head, there’s more than 2/32 of an inch of tread remaining. The penny test is an easy and accurate way to measure tire tread depth.

If you can see the top of lincoln’s. In other words, your penny should be going into the tread headfirst!. If so, you can quickly check the tread on your tires to see if there's still a safe level of tread left.

A tire tread depth gauge is a simple tool that is specifically designed to measure tread depth. Put the penny inside the tire ribs, placing it upside down, and the visible portion of the face would indicate the remaining. Thanks to ford motor company for providing this great instructional video on checking your tire's tread life using a coin.